Poly Alumonium Chloride
CHEMICAL FORMULA:
(Aln (OH)mCl3n-m)
- Longer chain of molecules, higher weight and a large number of Ionic charges a more effective Coagulating and flocculating agent as compared to traditional Aluminium Sulphate(i.e. Alum).
- We are an ISI CERTIFIED products and hence our PAC gives consistent results and effective solutions.
Packaging/Transportation
- Powder (PAC30) : 25/50 kg PP woven bags with two inner LDPE liners.
- Liquid (PAC10, PAC14 & PAC18) : 50kg HM-HDPE Carboys / 265 kg. HM-HDPE Barrels / Acid resistant rubber lined tankers.
- We are moderately acidic and is to be stored in PP, FRP, HDPE or acid proof lined storage when taken in tanker loads.
APPLICATION
- Superior control of anionic substances in the furnish.
- Minimization of deposits in critical areas of the machine due to pitch, stickiest etc.
- Simple management of the wet end chemistry.
- Improved filler and fines retention. Improved paper quality.
- Improved drainage and machine speed.
- Reduction in downtime due to improved run ability.
- Provides a powerful two part system in conjunction with high molecular weight
- Polymers for retention and for save-all operations.
- Reduction in the use of other wet end additives such as size chemicals, retention polymers and starch.
- Contributes less acidity to the mill water because it has been pre-hydrolyzed.
- Can be used with calcium carbonate fillers and neutral size additives because of the higher pH conditions in which it functions.
- A more rapid formation of the alumina species than alum is achieved - important in high speed operations.
- Does not contain sulphate ion and consequently eliminates a potential discharge problem from this source.
- Reduces the discharged load to the wastewater treatment plant.
